Product Description

The Bosch Rexroth MAC071B-0-PS-4-C/095-A-0/S001 AC servomotor cannot be used without a drive controller. This servomotor associated connectors for power and tacho feedback connections must be bought separately. The product deploys a natural convection cooling mode. This device portrays a hot housing surface during the operation period. The unit must not be lifted by holding onto the output shaft. It features spigot nuts on its connectors. The motor should not be subject to heavy loads on its shaft during its handling and transportation. This product must be stored and transported only in the horizontal position. The device is equipped with protective covers on the output shaft and connector housing. This unit encompasses a keyway output shaft as per DIN 6885 specifications. It has a rating plate with its type designation and key technical details attached to the housing. The motor is mounted with an incremental encoder with standard mounting for evaluating the position of the rotor. This product related power and feedback cables are designed for operation and storage between -30 ?C and 80 ?C. The device has a phase current rating of 7.8 A. This unit incorporates soldering type circular power connectors. It is highlighted by high reliability because of various structural features. The servomotor related connectors for electrical connections are located on flanged sockets on the housing. This product uses a tacho generator with rotor position detection for the tacho feedback. The device has a floating bearing on side A that absorbs radial forces. This unit houses a mounting flange that is designed with throughholes. Its cables are directly connected to the motor.