Product Description

The MAC071B-0-KS-3-C/095-A-1 model has tacho feedback (with a second shaft end) and is suitable for use in outdoor environments. The MAC Series model is manufactured by Bosch Indramat Rexroth and weighs 8.8 kilos.

The MAC071B AC servo motor has a 95 mm centering diameter and delivers 4.4 Nm of continuous torque while using a minuscule 14.2 A of constant current. The model has a power connection on the A-marked side of the housing, and the ambient temperature must be between 0 and + 45 degrees Celsius for it to work effectively. As a result of the use of natural convection, the model has a thermal time constant that is equivalent to 45 minutes. The MAC series AC servo motor is capable of 6000 revolutions per minute and generates a substantial amount of power. The required temperature range for transporting and storing the model is between - 20 and + 70 degrees Celsius. A standard holding brake is incorporated into the model. The holding brake has a holding torque of 3 Nm and operates at the nominal voltage of 24 V.

The model MAC071B-0-KS-3-C/095-A-1 has a dust and water protection rating of IP65 and an insulation value of F. Because of the model's use of permanent magnets in its design, it has a moment of inertia that is equal to 9.9 x 10-4 kgm2. The motor is housed within a casing that has been primed and painted black. It is resistant to diluted acids, yellowing, oxidation, and chalky deposits. However, the covering may peel if the housing is routinely cleaned with a steam cleaner. Wake Industrial can ship this servo motor (MAC071B-0-KS-3-C/095-A-1) to any location.