Product Description
The MAC071B-0-FS-4-C/095-A-1/WI530LX is an Alternate Current servo motor from the MAC lineup. It was designed and developed by the Bosch Rexroth Group. The standard motor speed for this Alternate Current servo motor is 2000 m/s. The constant torque at standstill is 4.4 (6.6) Nm. The constant current at standstill is 5.0 (7.9). Its rotor moment of inertia is 9.9 x 10-4. The drive in use determines the motor speed that is usable. This servo motor has a 60K overtemperature in the motor casing.
The drive can limit constant torque. Ordering the motor power connector (INS 108) independently is required. When tightening screws in the threads of the central spigot, users must adhere to the Maximum . Tightening Torque MA of 2 Nm. When the order is placed, the electrical power connector's output direction is chosen. The points that follow are possible output directions: left, right, side A, and side B.
The suitable range for the immediate vicinity's temperature is 0 to +45 degrees Celsius. The appropriate range for storage and transportation temperatures is -20 to +80 degrees Celsius. The maximum permitted installation elevation is 1000 meters above sea level. The protection category and thermal classification are IP 65. The housing coat has been identified as "F.". The voltage constant of the tachogenerator is 0.0143 Vs/rad, or 0.0286 V/min-1.The motor's output data is high. A high torque-inertia ratio leads to high dynamic performance. The motor transfers heat from the stator windings to the exterior wall of the motor housing, resulting in a high overload capacity. This AC servo motor supports the utilization of maximum torque across a broad range of speeds. Compact architecture results in a high power-to-weight ratio.
Wake Industrial Warranty
