Product Description
This AC Servo Motor (Alternate Current), with the product ID MAC071B-0-FS-4-C/095-A-0/WI561BX, is manufactured by Rexroth and is part of the MAC Series. For power connection, it comes with (04) four ports. These are classified depending on which side of the AC servo motor they are located on. The connector labeled “A” is assigned for Side A; the connector labeled “B” is assigned for Side B; the connector labeled “R” is assigned for Side R; and the connector labeled “L” is assigned for Side L. The connectors R and L are assigned for inspecting the output shaft.
For optimal performance, this AC Servo Motor is recommended that the motor be installed in an area with an ambient temperature range of 0 degrees Celsius to 45 degrees Celsius. For storage, the temperature should fall within the range of -20 to +80 degrees Celsius. Plants that are situated 100 meters above sea level should not use this AC servo motor. For protection against dust and other harmful particles, this AC (Alternate Current) servo motor comes pre-installed with an IP65 housing. Furthermore, this AC servo motor also boasts an “F"-rated housing coarse.
For different manufacturing needs, this MAC AC servo motor can be delivered with or without holding brakes. The holding brake secures the output shaft at a standstill. This allows for a safe halt of the axis, even in the absence of power. A MAC AC servo motor's motor feedback is always made up of only one tachopfeedback. An encoder that is fitted to the motor can be added for the purpose of assessing position. The tachogenerator's rated voltage constant is between 0,0143 1.5/1000 and 0.0286 3/1000 Vs/rad V/min-1.
Wake Industrial Warranty
