Product Description

The MAC071A-U-HS-2-C/095-A-1/S001 is an industrial servo motor produced by Rexroth Indramat to efficiently generate and transmit kinetic energy in industrial servo system. This industrial motor operates in comjunction with TDM, KDS, and the DSC drive controller series also produced by Rexroth, when used with any of these compatible controllers, a rapid response drive system is formed. This industrial motor is especially well suited for use in machine tools, textile machines, printing presses, robotic machines, handling equipment, and transfer facilities. The motor is designed according to the IP65 protection class, it is also covered by a prime black coat that is resistant against mildly corrosive liquid substances including dilute acids, dilute alkali, sea water, sewage, and mineral oil. The motor also features a brushless design, it does not generate a high amount electromagnetic noise during operation and also saves energy. The MAC071A-U-HS-2-C/095-A-1/S001 industrial motor is designed with a standard blocking brake that generates a holding torque of about 3 newton meters, this blocking brake functions to retain the load connected to the motor’s output shaft when the motor is at a standstill. Unlike convectional industrial motors, the high degree of protection provided by the motor housing allows the motor to maintain optimum operation even when it is being used in environmental conditions considered poor for industrial machines. The MAC071A-U-HS-2-C/095-A-1/S001 industrial servo motor operates at a nominal speed of 2000 revolutions per minute, it also features an integrated tachofeedback that improves operational safety by carrying out speed evaluation per tacho-generator and rotor position recognition. At standstill, this industrial motor generates a continuous output torque of about 2.2 newton meters, it also requires a continuous current of about 2.6 amperes. The total weight of the moor is about 6.5 kilograms.