Product Description

The servo model is equipped with tacho feedback (mounted or incremental encoder) and is capable of rotating at a high speed of 6000 revolutions per minute. The MAC071A-1-VS-4-C/095-B-0/W1519LV/S001 motor's tacho feedback is vital for tacho-generator speed evaluation and rotor position identification.

The MAC series servo motor is a permanent magnet-excited motor with electronic commutation. Permanent magnets on the rotor are made from substances that enable the development of a motor with an extraordinarily low moment of inertia of 5.4 x 10-4 kgm2. The power connection for the servo motor is positioned on the B side of the motor housing (sides are labeled in the user manual that comes with the motor). The model has a winding inductance of 5.1 mH and a winding resistance value of 0.92 ohms. The model generates a continuous torque of 2.2 Nm while using 7.3 A of continuous current during natural convection at a standstill operation. For best performance, the motor must be paired with an appropriate drive controller. Due to its high IP65 protection certification and F insulation level, this MAC071A AC servo motor is suitable for use in challenging environments. The model weighs 6.5 kilograms and has a thermal time constant of 45 minutes.

The model MAC071A-1-VS-4-C/095-B-0/W1519LV/S001 housing contains an extra layer of black paint with a maximum layer thickness of 40 micrometers. The housing uses natural convection to disperse heat. This AC servo motor has a 95 mm centering diameter and an operating temperature range of 0 to +45 degrees Celsius. Wake industrial has this Indramat item (MAC071A-1-VS-4-C/095-B-0/W1519LV/S001) in stock and can promptly deliver it to your desired location.