Product Description
The MAC063D-2-FS-4-C/095-A-1/WA604XX synchronous motor is manufactured by Bosch Rexroth Indramat. The motor is produced to improve industrial processes by serving as rapid response motor that can withstand harsh environmental conditions, and support a broad range of industrial machines. This synchronous motor is also a permanent-magnet excited device. The permanent magnet excitation of the motor also contributes to the characteristic high resolution, high operation efficiency, and improved dynamic performance of the motor. The MAC063D-2-FS-4-C/095-A-1/WA604XX synchronous motor also features thermo switches designed to protect the motor from overtemperature damage by monitoring the temperature in the motor rotor and providing the drive controller with the information it needs to properly regulate the temperature in the motor. The motor also has an axial air blower that dissipate excess heat through surface cooling.
The MAC063D-2-FS-4-C/095-A-1/WA604XX servo motor is intended to be used with compactible Rexroth Indramat controllers, examples of these compatible controllers include controllers that belong to the TDM, KDS, and DSC drive controller series. This industrial servo motor operates with continuous current of 11 amperes when it is at a standstill, also at this current and state, the motor can generate a continuous torque of 3.5 newton meters. The rotor moment of inertial of the MAC063D-2-FS-4-C/095-A-1/WA604XX motor is about 4.8 to 10-4 kilograms per meter square.
The handling, installation and general operation of the MAC063D-2-FS-4-C/095-A-1/WA604XX servo motor should be done by a well-trained personnel, also to maintain optimum motor operation, the servo motor should not be used at an height higher than 1000 meters above sea level. The motor also has a holding brake that retains loads connected to its shaft.
Wake Industrial Warranty
