Product Description
The Bosch Rexroth MAC063D-0-JS-4-C/095-A-1/WA610XX/S001 AC servomotor is meant to be mounted and installed only in industrial machinery. This motor has an output shaft with a keyway in accordance with DIN 6885, Sheet 1 specifications. The product works in association with the manufacturer’s DSC, KDS or TDM drive controller. This device can be utilized in a machining center with four axes deployed in tool and workpiece handling facilities. The unit encompasses permanent magnets in its rotor. Its tacho feedback helps in recognizing the position of its rotor. This motor is capable of rendering maintenance-free operation. The product helps in establishing form-fitting style shaft-hub connections with its output shaft.
This device uses connectors positioned on flanged sockets for the direct connection of its tacho feedback and power cables. The unit depicts an encoder code of 610. It has decreased output when the operating conditions deviate from the ideal operating conditions. This motor is safeguarded against the penetration of water by its housing. The product is equipped with plastic protective covers over its shaft and connectors that must remain intact during the storing and transit times. This device pickup must never be done by holding on to the shaft. The servomotor is available with a year’s warranty from Wake Industrial.
The motor operation should take place without exceeding the allowed radial plus axial forces. The unit is to be put to use only after reading and understanding its operating instructions. Its type plate must be positioned on the housing such that it is clearly visible. This product-related power cable has a cross-section of 0.75mm2. The device is balanced with a 5 x 5 x 22 matching key that has to be ordered separately. This unit-related permissible axial force is calculated in terms of its permissible radial force. The servomotor can be sent to any global destination.
Wake Industrial Warranty
