Product Description

Bosch Rexroth designed and manufactured this Alternate Current MAC servo motor with the Catalog ID MAC063D-0-FS-4-C/095-B-0/WI534LX/S001. This AC (Alternate Current) servo rotor normally runs at 6000 m/s. Standstill torque is 2.7 (33.5) Nm. Stable idle current is 8.4 (11.0). Rotor inertia is 4.8 x 10-4. Motor speed is determined by the drive. The motor enclosure of this servo motor is overheated. Just like any other MAC servo motors, the MAC063D-0-FS-4-C/095-B-0/WI534LX/S001 Alternate Current motor can be operated in a stationary manner under weather- proofed conditions as per IEC 721-3-3, edition-1987, or EN 60721-3-3, edition-6/94.

Constant torque is limited by the drive. A separate motor power connector (INS 108) must be ordered. Users must follow maximal directions when imposing screws in the central spigot threads. For the nearest location, 0 to +45 degrees Celsius is ideal. Transport and storage should be between -20 to 80 Celsius. The setup height limit is 1000 meters over the average sea level. Previous industry experiences show that installation design is vital to ensure encoder signal transmission without interference. Incremental encoders can only be installed to MAC 063s with radial surface-cooling or natural convection units.

MAC makes the Alternate Current (AC) servo motor MAC063D-0-FS-4-C/095-B-0/WI534LX/S001. Bosch Rexroth developed it. Drive limits steady torque. Motor power connector (INS 108) must be ordered separately. Users must follow the Maximum when tightening screws in the central spigot threads. Tightening 2 Nm MA torque. When ordering, the power connector's output direction is chosen. Possible output directions are left, right, side A, and side B. Protection and thermal classification are IP 65. The housing coat is "F." Tachogenerator voltage is 0.0143 Vs/rad, or 0.0286 V/min-1.High motor output data.