Product Description

This Bosch MAC series Alternate Current servo motor has the Catalog ID MAC063D-0-FS-4-C/095-B-0/WA612XX/S001. This Alternate Current (AC) servo has a 2000 min-1 nominal speed. Stop torque is 4.4 (6.6) Nm. Stop current is 5.0 (7.9). The motor has 9.9 x 10-4 rated inertia. In 20 degrees Celsius weather, torque remains 0.880. The 20-C winding resistance coefficient is 2.7. This motor has 22 winding inductance. The pulse power peaks at 25. Encoder, rotor power, and tacho feedback cords are also IP 65 rated. The tachogenerator's constant voltage  rating is 0.0143 1.5/1000 to 0.0286 3/1000 V/min-1 Vs/rad.

The allowable ambient temperature range is 0–45 degrees Celsius. Transport and storage must be done between -20 to 80 degrees in Celsius. Maximum installation height is 1000 meters over sea level. IP 65 indicates insulation and protection. The wire's cross-section is 8.8 ± 0.3 mm (milli-meters). Fixed routing requires 40 mm (milli-meters) minimum bending radius. Maintaining the minimal bending radius for flexible routing can extend service life to 1,000,000 bend loads. Weight is 0.102 kg/m. Can be used directly in the manufacturing area despite coolants, soluble oil emulsions, and other environmental conditions. This is achievable because the motor housing's enclosure is IP 65.

The driver directly stipulates the maximum motor speed that can be reached. Furthermore, the drive can be deployed to limit the continuous torque. The output direction for the electrical cord can be selected at the time of purchase. For motor power connector, INS 108 must be ordered separately. A separate Tachofeedback connector can also be mounted, however it is not included with the base package. Customers would have to place a separate order for the Tachofeedback connector.