Product Description
The servo motor MAC063D-0-FS-4-C/095-A-1/WI520LX/S001 model enclosure features an IP65 rating and a black finish to prevent weather and corrosion damage. The model has tacho feedback and an incremental or absolute encoder, and it must be used with the specified attachments and accessories.
The thermal time constant of the MAC063D AC servo motor is 30 minutes, and its inductance is within minimal minits of 0.9 mH. The model's power connection is located on the housing's A side and must be kept between -20 and +80 degrees Celsius. When paired with TDM, KDS, or DSC drive controllers, the AC servo motor from the MAC series creates a servo drive that has a quick reaction. The design of the model's housing makes it possible for natural convection to be used for heat dissipation to the outside. Permanent magnets allow the motor to have a low moment of inertia. The MAC063D AC servo motor may be used in machine tools, textile machinery, printing presses, packaging machinery, robotics, handling equipment, and transfer facilities. This model is a permanent magnet-excited motor with electronic commutation. The permanent magnets of the rotor are made up of materials which make it possible to construct motor with very low inertia.
The model MAC063D-0-FS-4-C/095-A-1/WI520LX/S001 insulation rating is F, and it must be placed properly to prevent vibrations on the specified equipment. Motor efficiency is often degraded by vibrations. This model's heavy-duty holding brake has a minimal nominal current of 0.6 A and a nominal voltage of 24 V. During natural convection at standstill, the servo motor (MAC063D-0-FS-4-C/095-A-1/WI520LX/S001) can produce high amount of constant torque of 2.7 Nm while using minimal constant current of 8.4 A.