Product Description

The MAC063C-0-MS-4-C095 AC servomotor from Bosch Rexroth is cooled by natural convection. This motor houses an encoder that is designed exclusively for motors of this series. The product comes integrated with tacho feedback. This device can be operated in a machining center with four axes as well as tool and workpiece handling facilities. The unit related permanent magnets are fitted onto a laminated core that is embedded in the rotor. Its tacho feedback helps in evaluating the position of the rotor. This motor can be operated even under adverse environmental conditions. The product uses power and tacho feedback cables that meet IP 65 demands. This device has a peak torque that can be used over a wide speed range. The unit is intended to be installed at an altitude ranging from 0 m to 1000 m over sea level. It offers protection against contact with moving or live parts using its housing and covers. This motor has no shaft sealing on its mounting flange. The product can be mounted in IM B5, IM V1 and IM V3 orientations as per DIN IEC 34-7 specifications. This device allows clamping components to be fitted on its output shaft. The unit has a permissible radial force that is calculated in terms of the average speed and the point of application of force. It uses a straight connector or an angle connector for feedback. This servomotor associated tacho feedback is used for standard applications. The product is associated with a DC bus voltage from a regulated or an unregulated power supply. This device portrays a thermal time constant of 30 minutes. The unit has a lifespan of 30,000 operating hours for its bearings.