Product Description

The MAC063C-0-HS-3-C/095-A-1/WI Bosch Rexroth AC servomotor must always be operated with the appropriate drive controller. This motor has a tach voltage that is set to match its nominal speed. The product has a maximum tightening torque of 1 Nm for screws in the thread of the center spigot. This device portrays Class F insulation. The unit encompasses a black prime paint over its housing. It can be mounted in any orientation. This motor features high reliability and high output data. The product should be connected with the manufacturer's readymade cables as far as possible. This device encompasses thermo switches with a series connection to monitor its temperature. The unit supports the direct mounting of belt pulleys and pinions on its output shaft. Its bearing assembly is designed such that it is possible to apply high radial loads. This motor can be used under adverse environmental conditions because of its IP 65 protection class. The product needs no blower to support its cooling action. This device has a fixed orientation for the output direction of its power connector. The unit must be handled only by qualified personnel. Its side B encompasses the second shaft end. This servomotor offers protection against live and/or moving parts through its housing and covers. The product associated permissible continuous torque is depicted by the operating curves in S1 operating mode. This device has a maximum duty cycle time of 10 minutes with intermittent operations. The unit related encoder depends on sinusoidal signals or square-wave pulses for its operation. It has a 063 size code.