Product Description
The servo model is equipped with tacho feedback and is capable of rotating at a high speed of 6000 revolutions per minute. The MAC063B-0-JS-4-C/095-B-0/WI517LX/S001 motor's tacho feedback is vital for tacho-generator speed evaluation and rotor position identification.
The MAC063B AC servo motor is a permanent magnet-excited motor with electronic commutation. Permanent magnets on the rotor are made from substances that enable the development of a motor with an extraordinarily low moment of inertia of 3.2 x 10-4 kgm2. The power connection for the servo motor is positioned on the B side of the motor housing (sides are labeled in the user manual that comes with the motor). The model generates a continuous torque of 1.5 Nm while using 5.8 A of continuous current during natural convection at a standstill operation. For best performance, the motor must be paired with an appropriate drive controller. Due to its high IP65 protection certification and F insulation level, this MAC063B AC servo motor is suitable for use in challenging environments. The model weighs 3.9 kilograms and has a thermal time constant of 30 minutes.
The model MAC063B-0-JS-4-C/095-B-0/WI517LX/S001 housing contains an extra layer of black paint with a maximum layer thickness of 40 micrometers. The housing uses natural convection to disperse heat. The model comes without a holding brake. The model can be installed at a maximum height of 1000 meters above sea level without degradation in the performance. This AC servo motor has a 95 mm centering diameter and an operating temperature range of 0 to +45 degrees Celsius. Wake industrial has this item (MAC063B-0-JS-4-C/095-B-0/WI517LX/S001) in stock and can promptly deliver it to your desired location.