Product Description

The MAC063B-0-JS-3-C/095-A-0/S001 AC servomotor by Bosch Rexroth cannot be operated without a supporting drive controller. This servomotor feedback always comprises a tacho feedback. The product is also equipped with a second shaft end. This device has a keyway output shaft that is designed as per DIN 6885 specifications. The unit is capable of supporting only Design B5 mounting. Its mounting flange is equipped with throughholes. This motor has a phase current of 4.7 A. The product uses soldering type power connectors. This device does not come with any encoder mounted on its housing. The unit allows the mounting of the customer's encoders on the second shaft end on side B. It should be properly grounded to the drive amplifier. This motor has no blocking brake attached to it. The product is prone to a fracture of its output shaft with ever-increasing deformations. This device related 5 x 5 x 22 matching key for balancing the output shaft has to be ordered separately. The unit comes with the output direction of the electrical power connector set as side A. This servomotor supports the use of either an angle or a straight connector for feedback. Its connecting cables feature an IP 65 protection rating. The product incorporates a DS M5-10 center spigot with screws featuring threads as per DIN 332 specifications. This device does not come fitted with the power and tacho feedback connectors. The unit has a brushless design and compact construction that allows it to be used even in small machinery. It is not needed to completely seal the components mounted on the second shaft end because of the IP 65 protection class of the second shaft end. This motor can be mounted on handling equipment.