Product Description

This MAC series motor MAC063A-0-RS-3-C/095-B-0/S001 model has a winding inductane of 3.5 mH and a winding resistance of 3.7 ohms. Black housing with a primer coating houses the motor. The housing's primary finish is resistant to diluted acids, yellowing, oxidation, and chalky deposits.

This MAC063A AC servo motor is equipped with tacho feedback and a second shaft end and can be used in outdoor environments. The model includes a power connection on the B-labeled side of the housing, and for it to work effectively, the surrounding temperature must be between 0 and +45 degrees Celsius. Due to the permanent magnets used in its construction, the model possesses a moment of inertia of 2.4 x 10-4 kgm2. The AC servo motor can spin at a speed of 6000 revolutions per minute and generates a tremendous quantity of power. Due to the use of natural convection, the MAC063A AC servo motor has a thermal time constant of 30 minutes. The motor can be used directly within the working area of the machine even under poor environmental conditions such as effects of coolants or soluble oil emulsions.

The model MAC063A-0-RS-3-C/095-B-0/S001 is built by Bosch Indramat Rexroth as part of their MAC Series and weighs 3.2 kilos. The AC servo motor has a centering diameter of 95 mm and generates 0.8 Nm of continuous torque while using 3.5 A of continuous power at standstill. The model must be transported and maintained at temperatures ranging from -20 to +70 degrees Celsius. The model has an IP65 certification for dust and water resistance and an F rating for insulation. This servo motor (MAC063A-0-RS-3-C/095-B-0/S001) could be shipped worldwide by Wake Industrial.