Product Description

The MAC025B-0-ZS-4-E/040-B-0 Bosch Rexroth AC servomotor must not be put to operation without the specified drive controller. This motor has no blocking brake. The product is equipped with an absolute encoder or an incremental encoder to evaluate its speed. This device has a nameplate attached to its housing. The unit can be used without a control cabinet. It depicts minimum installation work if the manufacturer's readymade cables are used. This product comes with spigot nuts on its connectors. The device is meant to be handled only by personnel with the relevant expertise. This unit must be kept dry all the time. Its output shaft tends to get damaged if is used for the motor pick up action. The motor encompasses bearings with lubrication for a lifetime if used under the rated environmental conditions. This product encounters axial and radial forces when it is being operated. The device should be mounted such that its rating plate is clearly visible. This servomotor functions like a servo drive with a rapid response when it operates with the drive controller. The unit is noted for its low inertia because of the choice of materials used for the permanent magnets. Its power connector is directed to side B and cannot be changed. The motor comes with two sets of windings. This product can be mounted in any orientation. The device has a high degree of reliability. This unit has an IP 65 protection category. It has a floating bearing on side A. The motor does not need a blower to support its cooling action. This product can be connected directly to its cables using the connectors on their flanged sockets.