Product Description

The LTU350 0 608 750 108 Bosch Rexroth servo amplifier is used with Ergo spin nut runners to control its current and speed. This servo amplifier receives its input voltage from the supply module. The product is meant to be assembled, operated, and transported according to the instructions given in its documentation. This device cannot be used on a standalone basis. The unit should adhere to the specified ambient operating conditions. It is meant to be installed only in industrial machinery. This amplifier is designed for use with the manufacturer's BT356 card rack and SB356 system box. The product has two safety fuses in its intermediate circuit for its protection. This device encompasses a LED-backlit graphic LC display to assist its operation. The unit has an output frequency ranging from 0 Hz to 1000 Hz. It portrays compatibility with the rated current of the associated motor. This amplifier may cause personnel injury or property damage if it is not handled properly. The product is meant to be handled only by qualified and trained personnel. This device does not support the placing of other objects over its housing. The unit must not be subject to mechanical loads at any point of time. It comes along with a copy of its operating instructions. This servo amplifier must not be assembled under pressure or voltage. The product can be cleaned using only water and a mild detergent. This device renders maintenance-free operation if it is used as intended. The unit features an ambient operating temperature range of 0 °C to 55 °C with a fan. It should be free of condensation all the time.