KSM01.2B-076C-35N-S1-HP0-SE-NN-D7-NN-FW

Product Description

The Rexroth Indramat KSM01.2B-076C-35N-S1-HP0-SE-NN-D7-NN-FW is part of the IndraDrive platform. It is a distributed servo drive. Size of the KSM01.2B-076C-35N-S1-HP0-SE-NN-D7-NN-FW drive is 076, the winding code is 35 and the length is C. The drive supports several integrated features including an optical singleturn Hiperface encoder with 128 increments, a hybrid electrical connector, a motor shaft with keyway and a SERCOS 2 (RS-422) master communication interface. The motor shaft includes a seal to protect against dust and moisture ingress. Safety technology and holding brake are not available on the KSM01.2B-076C-35N-S1-HP0-SE-NN-D7-NN-FW. Connection voltage for the drive is 750 Volts DC. Rexroth requires that the firmware for the drive be ordered separately from the hardware. Cooling method which is available on the drive is natural convection. This requires provision of adequate amount of free space on all sides of the installed drive for the air flow required for cooling.

The KSM01.2B-076C-35N-S1-HP0-SE-NN-D7-NN-FW is UL listed and is certified by CSA. The short circuit current rating for the drive is 42,000 Amps. The peak bypass current rating is 25 Amps. The ambient temperature range for optimal operation with rated data is 0 to 40 degrees Celsius. The protection category of the drive housing is IP 65. Rexroth recommends that the KSM01.2B-076C-35N-S1-HP0-SE-NN-D7-NN-FW should not be installed inside a control cabinet. The average sound pressure level for the KSM01.2B-076C-35N-S1-HP0-SE-NN-D7-NN-FW is less than 75 dB. Specifications for the motor on the drive include 4700 RPM maximum speed, 25 minutes thermal time constant, 17.7 Amps maximum current and 29 Nm maximum torque. An optional holding brake can be ordered for the servo drive if required. Only trained personnel should install and operate the KSM01.2B-076C-35N-S1-HP0-SE-NN-D7-NN-FW. This unit can be shipped globally with a one-year warranty period from Wake Industrial.