KDV 1.3-100-220-300-W1-115-220

Product Description

Bosch Rexroth manufactures high quality automation equipment that is used in modern industries around the world.

The KDV 1.3-100-220-300-W1-115-220 power supply unit has a maximum continuous input power of 30 kVA and a 300 A maximum output current. The power supply unit can be used with mains connections and servo drives with a continuous power output of up to 24 kW. For simplifying the user's operation, the power supply unit comes multiple monitoring functions. The unit can communicate with drives through a wire ribbon cable. The monitoring capability enables the power supply unit to monitor the temperature and current of the drives, motor feedback, line voltage, and load on the bleed resistor. In case of an emergency, the power supplied to the drives is immediately shut off to prevent accidents. Operators can troubleshoot the system using the system’s LED display.

The KDV 1.3-100-220-300-W1-115-220 can supply the drives even if a power failure occurs. In this case, the DC bus is used to supply electronic circuitry. This model needs to 380…460 V three phase power supply that operates at a 50…60 Hz frequency. A high continuous power output is achieved through this power supply because of low heat losses. The power supply unit is connected with a heat sink that is installed at the rear side of the enclosure. The system can be operated in a 5 ᵒC to 45 ᵒC temperature range. For achieving the best performance, the system’s recommended installation height is within 1000 meters above sea level. The drive has been designed as per IP 65 protected standards and is protected against water splashes, exposure to non-corrosive agents, and ingress of dust particles. This product is available from Wake Industrial with a one-year warranty period.