KDV 1.3-100-220-300-W1

Product Description

Bosch Rexroth manufactures top of the line motion control equipment that is used for industrial automation.

The KDV 1.3-100-220-300-W1 is a power supply unit produced by the company. The unit supplies power to the servo drives and mains connection. The overall continuous output power of the system depends on the type of commutation chokes, transformers, and capacitance modules that are integrated with the power supply. Servo drives with a power output of up to 24 kW can be supplied with this unit. The device has inbuilt voltage regulation mechanisms that are used to adjust the variations in the line voltages. In this way, drive operations are unaffected with variations in the input voltage. This also enables drives to run at high speeds. This model requires a three phase connection that operates on 50…60 Hz and between 380 V…460 V. The unit can be connected directly and no transformers are required for this purpose.

The KDV 1.3-100-220-300-W1 has low heat losses that enable it to generate a high continuous power output. Only 20% of total heat losses remain within the unit’s enclosure because it can be installed along with the heat sink. The heat sink is installed on the back panel of the enclosure. The device can be set up in accordance with the IP 65 protection standard. An installation set has been provided with the unit that can be used to seal off the enclosure’s opening. Under IP 65 category protection, the power supply unit can be protected against the ingress of dust particles and harmful chemical substances such as emulsions, oils, non-corrosive agents, etc. The power supply unit can also absorb regenerated energy from the drives. This product is available from Wake Industrial with a one-year warranty period.