Product Description

The KDS1.3-30-300-W0 servo drive by Bosch Rexroth is cooled by natural convection. This drive should not be operated with the doors of its control cabinet left open. The product must be commissioned before it is operated. This device has a reset button, an LED display and an offset rotary button among various other connectors on its front panel. The unit must not be subject to force for assembling its mechanical parts. It may cause property damage or personnel injury due to the improper handling of its components. This drive is meant to be operated only if the application complies with the national EMC regulations. The product tends to trigger high electrical voltage because of an incorrect connection. This device cannot be operated even for a brief period if the equipment grounding conductor has not been permanently connected to its electric components as per the connection diagram. The unit must be switched on only after its protective guards and covers have been installed properly. It should not be operated if the operating conditions fail to comply with the specified ambient conditions. This product and its components must be worked on only by qualified personnel. The device must be installed in accordance with the EMC requirements. This unit may pose a risk of burns if its housing is touched when it is hot. It should be operated, maintained, and/or repaired only by qualified personnel. This drive has a leakage current of more than 3.5 mA. The product portrays a cooling time of at least 15 minutes after its disconnection from the power supply.