Product Description

The KDS1.1-150-300-W1-220/S104 servo drive from Bosch Rexroth operates with the manufacturer's MAC 90 to MAC 160 series of servomotors. This drive has a heat sink that is attached to a heat exchanger at the rear. The product deploys cold-running technology. This device has a speed weighting function on its programming module. The unit should not be operated under water. It must be mounted only in the vertical orientation. This drive cannot be used without a control cabinet. The product has live connecting points during the operation phase. This device has a series code of 1. The unit is associated with a special S104 code by the manufacturer. Its speed weighting is achieved by a fixed setting of the resistors soldered in position on the MOD 3 module. This drive has a LED display on the front panel to assist in fault diagnosis. The product is equipped with one differential input. This device must not be operated if the emergency stop switch of the machine in which it is installed is not working. The unit tends to show signs of dangerous movements when the associated motor has a faulty control. Its surface becomes hot when it is being operated. This drive is capable of operating like a torque-controlled drive. The product can be serviced without time-consuming adjustments and optimization because of its programming module. This device has a relay contact with a 24 V voltage rating and a 1 A current rating. The unit must be assembled, erected, operated, transported, and stored for faultless and safe functioning. It must be connected only with accessories supplied by the manufacturer.