Product Description

The KDA 3.2-100-300-A00-U1 Bosch Rexroth main spindle drive must be installed and operated only according to the instructions in its documentation. This spindle drive should be commissioned before its startup is done. The product is intended to be used without making any constructional modifications to its original state. This device depicts a panel mounting style. The unit is designed only for industrial use. It may cause damage or injury to property or personnel if it is not used properly. This drive must be properly mounted, installed, transported and stored for safe and optimum operation. The product portrays a +/-10 V analog speed command value. This device features the bus connection for its blower at the bottom of its front panel. The unit comprises a control panel with the Ready and Fault push buttons, a display and four keys. It offers no support for an auxiliary interface. This drive can be adapted to different motors, conditions at and of the machine as well as operation modes through parameterization. The product is not supposed to be installed at an elevation higher than 5000 m above sea level. This device portrays Class F humidity support as per DIN 40 040 specifications. The drive features protection against the penetration of objects with a diameter higher than 50 mm. This unit comprises a plug-in connector for a readymade cable. It should be lifted using suitable equipment. The product can be replaced without doing a blower replacement. This device dissipates heat outside the control enclosure in which its installation is done. The spindle drive related external heat emission and internal heat loss are dependent on the workload.