Product Description

The Bosch Rexroth KDA 1.1-150-300W1/220V main spindle drive can be operated with frameless spindle motors and asynchronous motors from the same manufacturer. This spindle drive is adapted to a motor through parameterization. The product portrays a modular profile. This device is designed to be operated between 5 °C and 45 °C. The unit shows a dip in performance when it is operated at higher than the specified ambient conditions. It is meant to be assembled in a totally sealed housing according to DIN 40 050 specifications. This drive must be free of condensation on its surface all the time. The product should be free of load when it is being transported. This device associated control enclosure must comprise drill holes and vents on its back panel. The unit comes with transparent guards on the front that must be secured in place after the DC bus voltage is turned on. Its mounting panel with screws for the installation is available in the M1-KD mechanical accessories kit. This drive must adhere to the limit values of emission of interference at the connecting points of the machine. The product must undergo a commissioning procedure before it is used. This device comes with long studs at the upper and lower ends of its housing. The unit must be in standstill mode before any work is done on it, This spindle drive will hardly require any maintenance if the operating conditions are followed without any deviation. Its heatsink must be inserted into the vents above the heatsink of the blower. The product should be used without making any structural changes. This device may cause property damage or personnel injury if it is not used properly. The unit must be handled only after reading and understanding the notes related to safety and intended use.