Product Description
The HVR03.2-W045N/S201 is the DC power supply unit operated with the regulated drive controllers. These power supply units are specially used to supply electricity to HDS and HDD drive controllers. It aids several modules to attach with single power supply units effectively. The HVR03.2-W045N/S201 has the unique generative power supply aids in running the drive controller in generator mode and regenerated energy back to mains. The HVR03.2 provides power to regulated DC bus voltage that aids to maintain drive dynamics under low voltage. It provides high-quality performance and optimum matching power with different applications and works well in small dimensions. The HVR power supply drive provides a control voltage to drive controllers. It has a high ON time brake mode for emergency shutdown or in case of mains failure.
The HVR03.2-W045N/S201 has the 3*380-480(+/-10%) input voltage and the frequency of 50-60(+/-2Hz) and has a DC bus voltage of 750V. The output DC voltage of the system is 45kW with a peak output of 135kW. the supply unit has 120kW of regenerated bleeder power with 80kWs maximum regenerated energy. The HVR03.2 unit weights 31 kg. It has a power input of 500VA with maximum load. The control voltage output of the supply unit is 300 W.
The ambient condition for the usage of the supply unit requires the +5°C to +45°C temperature with a derated value of +55°C. For the installation of the power supply unit is 1000 meters above sea level and has the maximum permissible relative humidity is 95% with absolute humidity of 25g water/m3 air. The HVR power supply unit falls in the IP 10 per EN60529/IEC529 protection category, which indicates no air pollution, dirt contamination, and no condensation in the air while usage of the supply unit. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
