HVR02.2-W010N/S204

Product Description

The Bosch HVR02.2-W010N/S204 is a power supply designed for supplying control and electrical power to drive controllers which are part of Rexroth DIAX 04 systems. It operates with a regulated DC bus voltage which is rated for 750 Volts. Recommended ambient temperature range for operation is 5 to 45 degrees Celsius and the recommended altitude range is 0 to 1000 meters above sea level. Operation of the HVR02.2-W010N/S204 in conditions that exceed these recommended ranges requires consideration of load factors as the power supply output will be derated. Additional components must be provided to limit voltage at elevations exceeding 2000 meters.  Isolation transformers may be required to limit the main AC voltage. Operation of the HVR02.2-W010N/S204 outside recommended conditions may lead to damage. The supply and associated components have IP 10 protection rating.

The supply is not protected against water and intentional accessing. The HVR02.2-W010N/S204 is designed for installation inside an industrial control cabinet. Supply units without reduced (derated) nominal data can only be operated up to ambient temperature of +45 degrees Celsius. Therefore use of a cooling unit may be required. Cooling units should be arranged so that condensation is not formed on the power supply. Furthermore the cooling units should be arranged so that the any condensation is not blown on to the power supply. Nominal power rating of the HVR02.2-W010N/S204 is 10 kilowatts. An integrated blower is provided on the HVR02.2-W010N/S204 to facilitate convection cooling. Weight of the power supply unit is 46.3 pounds. The rated basic power loss and power loss at peak continuous output are 150 Watts and 300 Watts respectively. Installation of the supply should be performed by trained personnel only. This unit can be shipped globally with a one-year warranty period from Wake Industrial.