Product Description
The Bosch Rexroth HNL01.2R-0590-C0065-A-480-NNNN is a mains choke. According to the produce type code, the product line is HNL, the line is 1 and the variant is 2. Supply system supported by the choke is regenerative. The rated nominal inductance and continuous current for the HNL01.2R-0590-C0065-A-480-NNNN are 590 microhenry and 65 Amps respectively. Capacitors rated for 20 microfarads are available on the choke as additional options. The protection category of the choke housing is IP10. This means that the choke is not suitable for outdoor use and must be installed inside an industrial cabinet where it will be protected from dust and moisture. The choke can be connector to 3-phase AC mains with 400 to 480 Volts AC rated voltage. A mains choke such as the HNL01.2R-0590-C0065-A-480-NNNN is used as an accessory with AC drives from the IndraDrive product line.
Use of chokes such as the HNL01.2R-0590-C0065-A-480-NNNN is recommended as it helps to increase DC bus power and to reduce harmonic distortion. The choke does dissipate 310 Watts as heat during operation. This factor needs to be taken into account during planning and adequate amount of free space should be provided around the choke to ensure that air flows smoothly and overheating does not occur. The HNL01.2R-0590-C0065-A-480-NNNN is a high power device which should only be installed after the installation instructions and safety instruction are read and understood. Failure to follow the recommended safety guidelines can lead to equipment damage and injury to working personnel. Shipping weight of the HNL01.2R-0590-C0065-A- 480-NNNN is approximately 45 kilograms. The choke dimensions are: 300 millimeters width, 360 millimeters height and 205 millimeters depth. The choke is usually installed between a mains filter and a contactor. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
