Product Description
The HNL01.1E-0106-N0235-A-500-NNNN mains choke manufactured by Bosch Rexroth lowers the harmonics within the mains current. The standard choke supports mounting in any desired position. The product tends to have high electric voltage when in use and tends to trigger serious injury and/or electric shock if it is touched during the time of operation. The device should be switched ON only after reading its associated documentation. The unit has three input terminals and three output terminals. The choke portrays a nominal inductance of 106µH. This product comes with 01 line code. The device comes fitted with a type plate that depicts various details such as ambient temperature, number of additional capacitors and their values, nominal inductance and more.
This mains choke avoids the possibility of voltage dips in its mains voltage because of the commutation taking place. The unit is likely to get damaged if it is not operated correctly. The product is structured with a wire coil forming a magnetic field when there is a current flow through it. The device is used in oil and gas pumps, HVAC equipment and extruders to mention just a few examples. The unit protects the drive from power system transients and surges as it is positioned between the power system and the incoming power terminals at the associated drive. The choke has a warranty period of one year.
The product helps in enhancing the overall power factor. This device has a 235A nominal current rating. This unit supports a feeding supply system. It adds impedance to the connected power system by lowering the power line distortion. The choke assists in the protection and noise reduction of the motor. The product is specifically used when the power capacity of the supply line is much higher than that of the connected drive system. The device absorbs the power line disturbances. The mains line choke is shipped through well-known logistics partners like DHL and FedEx.
Wake Industrial Warranty
