Product Description
The HMV02.1R-W0015-A-07-NNNN-AA from Bosch Rexroth is an IndraDrive supply unit with a 15 kW DC-bus continuous output power, with or without choke. The design of this device and its build material conforms with the Ingress Protection rating of 20 (IP 20). It weighs about 9.5 kg and features a regenerative supply mechanism. The HMV02.1R-W0015-A-07-NNNN-AA leverages an internal air-cooling setup that is facilitated by an integrated blower. Its inputs mains current is 23 Amperes, and its DC-bus capacity is 700 μF. Also, it has a regulated direct bus voltage of 750 Volts.
The mains voltage of this unit has an output dependence ULN > 400 Volts at zero power gain. It comes with a mains filter (HNF) and mains choke (HNL). When in use, the nominal environmental temperature of the HMV02.1R-W0015-A-07-NNNN-AA must not fall below 0 degrees Celsius or exceed 40 degrees Celsius. When utilizing this product at derated data, the maximum attainable temperature is rated at 55 degrees Celsius. Unlike other models of the Rexroth HMV series, the HMV02.1R-W0015-A-07-NNNN-AA does not come with an integrated braking resistor.
At a control voltage of 24V, the continuous current is 1.1 Amperes and power consumption is 27 Watts. The width of this supply unit is 150 mm, its height is 352 mm and its depth is 252 mm. The cooling unit of the HMV02.1R-W0015-A-07-NNNN-AA must be set to the same temperature as the ambient environment. Prior to the installation and commissioning of this product, the handling personnel must be aware of all electrical, safety, maintenance and operating instruction to prevent health-related hazards and eventual damage to the supply unit. If this product is faulty, it must remain unused. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
