HMV01.1R-W0018-A-07-FNN2

Product Description

The hmv01.1r-w0018-a-07-fnn2 power supply module is a regenerative type unit offered in a broad power spectrum by Bosch Rexroth. The company aims to solve power challenges in HMS01 and HMD01 drive controllers with its state-of-the-art power supplies.

The HMV01.1R power supply unit is listed under UL and CE markings. The device is engineered to provide short circuit current rating of 42000 A rms and requires rated input voltage from a 3 phase AC source of 380 to 480 V. This power supply unit requires input of 26 A and offers 24 A output current with DC 750 V. The device operates under ambient temperature ranging from 0 to +40 degree Celsius without output data loss. It can also operate above 40 to 55 degree Celsius with reduced nominal data. The allowed mounting position for this module is G1. The device cools through forced ventilation and comes with a built-in cooling fan with volumetric capacity of 95 cubic meters of air per hour with 290 W of power dissipation at continuous current. The rated power consumption control voltage input is measured to be 31 W. This model is 440mm high, 175mm wide and 262mm deep allowing easy fit in the tight spaces.

The HMV01.1R supply unit by Bosch should be provided with a minimum of 300mm gap at the top and 130mm on the bottom to allow efficient cooling. The temperature rise with minimum distances can be 65 K. The rated control voltage input for this module is 24 V with 5% tolerance. When using a motor holding brake cable of length greater than 50m, the rated control voltages are 26 V with 5% tolerance. The maximum inrush current at 24 V supply is measured to be 5.50 A. Customers must mention the type code (hmv01.1r-w0018-a-07-fnn2) when ordering.