HMV01.1E-W0030-A-07-NCNN

Product Description

The HMV01.1E-W0030-A-07-NCNN Bosch Rexroth power supply must be operated only by trained and qualified personnel. This power supply is kept cool during use with the help of an integrated blower. The product comes with a 2 pollution degree. The device features a 1 line code. The regenerative unit features a bus nominal voltage rating of 700VDC. It has an NCNN design code. There must be no structural changes to the product for it to be operated safely. The power supply must have a permanent connection to an equipment grounding connector at its grounding points before it is switched ON.

The drive controller that uses this device may show dangerous movements in case of a faulty control of the motor that is connected to it. The unit must always be allowed to cool for at least 15 minutes after it is switched OFF before it is touched. It should be operated only with machines and systems that operate in industrial areas. The product has a power rating of 30kW. The power supply features an X32 connector to connect the signals that are used for controlling the mains contactor as well as the braking resistor switch. The HMV01.1E-W0030-A-07-NCNN unit is available with a warranty from Wake Industrial for one year.

The equipment grounding connector associated with the power supply must be connected to the appropriate equipment grounding connector system of the control cabinet encompassing the drive controller. The device comes in a size of 440 x 262 x 150 mm (H x T x B). The product has a rated control voltage input of 24V +/-5%. The signal lines and load resistance lines must be routed as far away as possible from each other to avoid interference. The emission of interference from the unit can be prevented by using appropriate packaging. The power supply is packaged in custom military-grade foam for shipping.