HMV01.1E-W0030-A-07-FCN1

Product Description

The HMV01.1E-W0030-A-07-FCN1 power supply from Bosch Rexroth is operated along with a drive controller from the manufacturer. This power supply belongs to the HMV series of such power supplies from the same manufacturer. The product should not be used in a damaged or faulty state. There should be no removal or fitting of components to the device when its power is switched ON. The unit is equipped with a choke. It comes with a type-plate that has information like serial number, hardware index, part number, and device type. The module is CSA Certified and UL Listed. The power supply weighs 13.5kg.

The device operates as a feeder power supply. The DC power supply must be used with drive controllers that have either HMS or HMD power sections. The product can render the rated input current for the power section that it is connected to. The module features three terminals for connecting to the supply mains. The unit encompasses the three X31, X32, and X33 connectors. The X31 connector helps in analyzing the status of the unit. The device is cooled by internal air circulation during its operation. Its DC bus connection can be used to connect multiple drive controllers or a single drive controller to other components.

The polarity of the DC bus connection terminals of the power supply should not be reversed as it can result in damage. The connection of the related drive controller to another controller or the power supply unit can be done through a joint bar in the front. The equipment grounding connection of the product must be a minimum of 10mm² or AWG 8. Its equipment grounding connector is connected with M6 x 28 screws that have a tightening torque of 6Nm. The power supply features a one-year warranty and can be dispatched to your address anywhere in the world.