Product Description
Bosch Rexroth is a manufacturer of industrial motion control accessories.
The HMF01.1N-S0K1-M0600-N-480-NNNN is a servo motor filter produced by the firm. This model is used to control voltage stress in motors to a minimum. It also minimizes leakage current and reduces decay current. This motor filter allows the use of unshielded motor cables and the use of non-converter proof motors in voltage/frequency mode. The motor filter is able to reduce the electrical noise in equipment. This reduces the presence of high frequency currents inside the machine enclosure as well as the motor bearings. When this motor filter is used, the long cables between motors and controllers no longer induce an electrical disturbance in the nearby cables. Typically servo motors operate on three-phase pulses that have very high frequency spikes. These high frequency spikes directly affect the motor's rotor and induce a significant ground current in the device that ultimately affects the bearings.
The HMF01.1N-S0K1-M0600-N-480-NNNN is used to reduce the high frequency pulses that are known to cause chiseling and hammering on the motor bearings and eventually cause bearing failure. If not controlled through an appropriate motor filter, these pulses can cause sparking in the bearings and also induce catastrophic failure. In addition, the motor filter is used to control the electrical noise that causes equipment lockups. This motor filter also has the capability to control electronic overstress. Sensitive components like IC handlers, wire bonders, and pick-and-place equipment in machines also get damaged when electronic overstress (EOS) exceeds safe limits. This motor filter provides a comprehensive solution for electromagnetic interference issues in servo motors. In addition, this motor filter requires no maintenance and is very easy to install. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
