Product Description
Bosch Rexroth produces affordable equipment for several industrial automation sectors. The company manufactures a wide range of distributed brake choppers, servo drives, and drive controllers with a broad power spectrum.
The HLT01.1N-01M1-A-007-NNNN model is designed and manufactured by Rexroth Indramat. The unit is extensively used to develop an energy-efficient and economical motion control system. The HLT01.1 brake chopper helps in maintaining the voltage level of the system by dissipating the excessive voltage in the form of heat. The dc voltage requirement for this unit is 750 VDC and it is supplied by the respective drive controller. The HLT01.1 brake chopper is used to control the external brake resistor and increase the braking power of the unit. The model consumes 1100 kW of continuous power and the braking power depends upon the duty cycle of the system. The cycle time for the unit is 120 seconds. The brake chopper comes with a free mounting option and can be installed into any permissible mounting position. Before commissioning, the model must be configured according to the required operations and the minimum prescribed clearance (80 mm) should be maintained at the top and bottom of the unit. Make sure that the mounting position is clean and free from dust particles.
The model HLT01.1N-01M1-A-007-NNNN is protected under IP20 protection rating and it can operate under the maximum humidity of 95%. The maximum allowable temperature range for this unit is +55 degree Celsius, with 20% derating and it can operate ideally under the temperature range of -10 to +40 degree Celsius. The unit undergoes the displacement of 1.5 mm during the vibration of 3 – 10 Hz. The model comes in galvanic insulation. Order this brake chopper (HLT01.1N-01M1-A-007-NNNN) from Wake Industrial and receive it at your place. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
