Product Description
The HLC01.2C-02M0-A-007-NNNN Bosch Rexroth capacity module features DC bus connectivity. It has a mounting depth of 300mm. The device is widely used in cross cutting lines and roll feeds. It produces a controlled retraction motion during a power failure by utilizing the energy stored. This offers the assurance of the protection of the workpiece as well as the tool used in gear cutting machinery. The product assists in balancing the energy when the machining cycles take place rapidly. The unit has a nominal DC bus voltage rating of 700VDC. The unit helps in increasing the energy that can be stored in the DC bus.
The module assists in avoiding damage to the drive controller due to overloading when there are over 30 operating cycles in a minute. This device is an apt option for applications such as return motions that require energy even when a power failure is encountered. The product comprises a nominal capacitance of 2mF. It is compatible with the manufacturer’s HCS02, HCS03, HMV01, and HMV02 range of devices. The unit is mounted onto the control cabinet using two distance bolts. These bolts are intended to be fitted on the bright cabinet surface and can be used only when the capacitor is right next to a drive controller.
The DC bus capacitor must feature the contact rails connection for the control voltage as well as the DC bus. This product encompasses an IP 20 degree of protection in adherence with DIN EN 60529 specifications. The voltage rating of the device should be checked to see that it is not more than or equal to 50 volts before any work is done on it. The control voltage and DC bus terminals present on the unit have a tightening torque of 6Nm. The equipment grounding conductor of the module must be connected to the protective circuit present on the inside of the control cabinet. This capacity module can be dispatched worldwide with a warranty for one year.
Wake Industrial Warranty
