Product Description
The HDS05.2-W300N-HS58-01-FW is a drive controller designed by Rexroth Indramat. The controller weighs about 25 kilograms and consumes about 55 watts of power for signal processing. The HDS05.2-W300N-HS58-01-FW drive controller is produced by industrial professionals and has been tested before delivery to ensure it meets the international quality standard for industrial products. The controller is also quite flexible in its operation; it can be configured by the operator to control different types of industrial motors such as the 1MB motor, MKD motor, and so on. This drive controller's flexibility and efficiency make it popular among industrialists that operate a broad range of industrial machines, textile machines, packaging machines, paper processing machines, and lots more.
The HDS05.2-W300N-HS58-01-FW drive controller requires a continuous current of about 100 Amperes for optimum operation; however, it can draw a maximum current of 300 Amperes from the power supply unit. If the drive controller is required to carry out a high number of start-stop cycles, then it is important for the operator to connect an additional HZK capacitor module to the controller.
The HDS05.2-W300N-HS58-01-FW drive controller is designed with a built-in air blower and a heatsink, which helps to keep the heat generated by the controller within the permissible temperature range. While operating with the continuous current, the HDS05.2-W300N-HS58-01-FW drive controller also loses about 1200 watts of power. The controller's efficiency depends on the ambient temperature and the elevation level at which it is installed; thus, operators should ensure the HDS05.2-W300N-HS58-01-FW drive controller is not installed at a height greater than 1000 meters above sea level or in ambient temperature greater than +55 degree celsius.
Wake Industrial Warranty
