Product Description
The HDS05.2-W300N-HA07-01-FW by Bosch Rexroth is a sophisticated servo drive controller in the HDS family of controllers. It weighs 55.1 lbs (25 kg). This controller is intended for the control of electric motor via impulses. It comes with an in-built blower and loses heat by convection. The nominal current and maximum attainable current of this model are both rated at 300 Amperes. Like other HDS drive controllers from Bosch Rexroth, the HDS05.2-W300N-HA07-01-FW combines effectively with servo motors like the 1MB, MKD, 2AD and MHD variants. It initiates control and command interaction via an ANALOG interface with the aid of a software plug-in module.
The HDS05.2-W300N-HA07-01-FW must always be operated within the limits provided by the manufacturer. If deviations occur, the specific load factors should be noted – as it will translate to reduced performance. This drive controller offers excellent performance and can be specific in its mode of operation depending on the parameters logged in the software module. The logged parameters can be transferred from one drive controller to another with the aid of the modules. The firmware on the HDS05.2-W300N-HA07-01-FW is to be ordered as a separate subitem. The terminals on this equipment are screwed and have 4 pins. Additionally, its design categorizes it under insulation class C.
The design of the HDS05.2-W300N-HA07-01-FW does not afford it with underwater applications and extreme temperature scenarios. Also, do not run this equipment in dust-laden and toxic conditions. The characteristics of this drive controller include high-performance and a variety of use cases. During installing/mounting the admissible installation altitude is 1 km above sea level. The perm. environmental temp. during operation is between 5 degrees to 45 degrees Celsius. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
