Product Description
The Rexroth HDS04.2-W200N-HT28-02-FW is a HDS series drive controller designed for the digital control of motors. Performance specifications for the controller include 200 Amps rated current, 200 Amps peak current, 120 Amps continuous current at 4 kilohertz power section frequency, 80 Amps continuous current at 8 kilohertz power section frequency and 800 Watts operating power loss. The HDS04.2-W200N-HT28-02-FW is installed inside a DIAX 04 chassis. Multiple HDS series and HDD series drive controllers can be installed in a single DIAX 04 chassis. One HVR or HVE series power supply module installed in the same DIAX 04 chassis can provide power to multiple drive controllers. The HDS04.2-W200N-HT28-02-FW is available in a IP 10 rated housing which measures 498 x 265 x 150 millimeters and weights 19 kilograms. The HDS04.2-W200N-HT28-02-FW is air cooled and includes an air blower.
To ensure smooth air flow around a mounted HDS04.2-W200N-HT28-02-FW, Rexroth has made the following recommendations for the minimum free space around the controller: 90 millimeters in front of the controller, 80 millimeters above the controller and 100 millimeters below the controller. These recommendations will help to ensure that the ambient temperature around an operating HDS04.2-W200N-HT28-02-FW stays between 5 and 45 degrees Celsius, which will ensure optimal controller performance with rated data. If these recommendations are not followed, then there will a high probability of the ambient temperature exceeding the maximum allowed ambient temperature which is 55 degrees Celsius, which could lead to controller damage. Command communication interface on the HDS04.2-W200N-HT28-02-FW is SERCOS. Function ID code for the drive controller is 28, and version of function ID is 01. Firmware for the drive controller needs to be ordered as a separate subposition. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
