Product Description
The HDS04.2-W200N-HS60-01-FW drive controller is an advanced product manufactured by Rexroth Indramat. It is designed to control the speed, acceleration, and position of industrial motors based on the signals it receives from the command center. This controller can be used alongside various industrial motors series such as the MKD, MHD, 1MB, and 2AD industrial motor series. The motor is part of the DIAX04, which is a wide collection of sophisticated drive controller manufactured by Rexroth Indramat; it is characterized by its rapid response, high-performance data, and high service life. The HDS04.2-W200N-HS60-01-FW controller can be applied in industrial applications such as robotics, packaging and clothing systems, handling systems, and lots more.
The HDS04.2-W200N-HS60-01-FW drive controller is highly sensitive to electrostatic charges; these charges can damage its electrical components; thus, operators should ensure objects communing in contact with the drive are properly discharged by means of grounding. The drive controller is effectively tested for high voltage and insulation according to VDE 0160. The drive controller's housing unit is integrated with a fault reset key, which the operator can use to restart the operator after maintenance or repair operations have been carried out on the drive. The control unit of the drive controller also contains an H1 status display, which it uses to display diagnostic error messages in the case of operational errors.
The HDS04.2-W200N-HS60-01-FW drive controller operates with a rated current of about 200 Amperes and a continuous current of 120 Amperes. The housing unit of the drive controller meets the IP10 protection category. If the controller is not required for immediate application, operators should ensure it is stored in ambient temperatures that fall within -30 to +85 degrees Celsius. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
