Product Description
The Rexroth HDS04.2-W200N-HS47-01-FW is an Indramat HDS series drive controller. It is installed inside a DIAX 04 chassis and powered by either a HVS or HVE power supply unit installed in the same chassis. The controller is designed for control of Indramat motors which belong to MKD, MHD and 2AD product lines. The HDS04.2-W200N-HS47-01-FW has a modular structure with slots which can be used for installation of plug in modules. Two slots are fixed: slot U1 for command communication module which in the case of the HDS04.2-W200N-HS47-01-FW is SERCOS, and slot U5 which is allocated to the software module. Firmware for the controller is loaded on the software module and needs to be ordered as a separate subposition. As per Rexroth type code, the function ID code and version of function ID for the controller are 47 and 01 respectively.
Performance rating for the HDS04.2-W200N-HS47-01-FW include 200 Amps current rating and 200 Amps peak current rating. The continuous current of the controller varies with clock frequency of the power section: it is 80 Amps at 8 kilohertz and 120 Amps at 4 kilohertz. The HDS04.2-W200N-HS47-01-FW is air cooled and requires proper clearance for smooth air flow. The HDS04.2-W200N-HS47-01-FW measures 498 x 265 x 150 millimeters. Rexroth recommends 90 millimeters (minimum) clearance in front of the mounted controller, 100 millimeters (minimum) below the controller and 80 millimeters (minimum) above the controller for smooth air flow required for convection cooling. The HDS04.2-W200N-HS47-01-FW has an internal blower to aid the flow of air required for cooling. Modular structure of the HDS04.2-W200N-HS47-01-FW ensures that any faulty controller can be replaced with a working controller with minimum downtime: software module from the faulty controller can be installed in the replacement controller without requiring re-programming of the new controller. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
