Product Description
The HDS04.2-W200N-HS26-01-FW is a configured drive controller from Bosch Rexroth. The device may be used as a rapid-response drive, main drive or as a servo drive. It must be connected to an HVR or HVE supply module. The unit should incorporate an HZB brake resistor for controlling the energy due to braking if the power supply cannot do the regeneration. The controller is one of the HDS series of such devices from the manufacturer. It has a line code of 4 and a version code of 2. This product has a current rating of 200A. The configured device comes with a one-year warranty.
The controller must not be installed or operated on faulty or damaged systems. The unit is intended for controlling electrical motors as well as monitoring their operation. The product should not be operated under water or in very high temperatures. It encompasses a software module, a configuration type plate, a command communications module and additional plug-in modules. The HSM software module incorporates the operating software or firmware and helps in storing the drive-related parameters. The device must be installed within 1,000m above sea level. Load factors have to be taken into consideration if the unit operates outside ambient conditions.
The product features an IP 10 protection category according to DIN 40 050 specifications. The controller is intended for installation only in commercial machinery. The machine in which the device is installed must be allowed to start up only if it adheres to the requirements laid down by national safety regulations. It must be ensured that there is no human contact with the electrical connection points when the power supply is turned on. There are chances of the unit getting damaged if it is mounted in an incorrect orientation. The product can be safely dispatched to your address through our reliable delivery partners.
Wake Industrial Warranty
