Product Description
Rexroth Bosch utilizes innovative technology and automation architecture to provide automation and intelligence solutions to various industries such as manufacturing. With scalable hardware and high-quality software, the driver controllers allow maximum flexibility while maintaining efficiency. The overall system allows a wide power and current range to increase the number of appliances used. When instructions are followed as provided by the Rexroth Bosch Technologies, then safety ensues.
The HDS04.2-W200N-HA03-01-FW driver controller is designed to accommodate a continuous current of 120/80A and a rated current of 200A. The input continuous current power loss for this particular drive controller is 800W. When manufactured and assembled, it weighs 19kgs with the signal processing power consumption of 30W +/- 26V for the slide in configuration or module and basic units only. Sometimes, in the power section, you will need to use power cables. Find them from Bosch as these will be shielded and compatible with your IndraDrive.
The ideal external environment for the HDS04.2-W200N-HA03-01-FW driver controller in terms of the temperature surrounding storage, installation and transport temperature. The appropriate temperature range for at all times is between +5 to 45 degrees Celsius. However, in special cases like transport or storage, the recommended temperature is -30 up to 85 degrees Celsius as some external environment’s temperature may not be controllable. This transport temperature is tolerable as it is only short-lived. Also, the inbuilt air cooling system designed with an internal blower further works to ensure the driver controller maintains the ambient temperature. When installing the HDS04.2-W200N-HA03-01-FW and you want to maintain the rated data, then you should ensure the peak height above sea level of 1000 meters. The HDS04.2-W200N-HA03-01-FW can be shipped to any address worldwide with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
