Product Description
The HDS01.1-W050-R drive controller from Bosch Rexroth belongs to the DIAX04 product group. This controller is used along with the manufacturer’s MHD and MKD motors. The drive acts as either a main drive or a servo drive. The product should have a connection with an HVR or an HVE supply module. Multiple drives can be used with a single power supply to act as a compact drive package. The device tends to have a high discharge current and high voltage if it is used inappropriately. The unit is intended to be used only with the manufacturer’s spare parts and accessories.
This drive controller must be operated only by trained and qualified personnel. The product should not be used for radioactive, nuclear, high frequency, or medical applications. The device must not be operated if the ground wire is not permanently connected. It has a line code of 1. The housing of the connected motor must be grounded according to the connection diagram before the unit is switched ON. The controller should also have a secure connection to the supply network because the leakage current is more than 3.5mA. The controller must be connected to only safely isolated voltages. The HDS01.1-W050-R controller is delivered in custom military-grade foam packing.
The device may encounter dangerous movements any time during operation if the control is faulty. These dangerous movements can cause equipment damage or danger to life if they are not corrected. The unit can operate at a maximum temperature of 55°C with derated data. The emergency stop switch of the product must be mounted in an easily accessible location. This switch should be used to disconnect electrical power during maintenance and repair work. The surface of the housing is likely to become very hot during operation. The drive controller comes with a one-year warranty tag.
Wake Industrial Warranty
