Product Description
Bosch Rexroth’s automation systems stand out in the global automation industry because of their state-of-the-art designs and technology. One of them is the innovative Rexroth IndraDrive drive system with components like servo motors and gearboxes, power sections, and control units. The HCS family of drive converters are units in this system used in machine tools, general automation, and paper processing machines.
The HCS01.1E-W0054-A-03-E-S3-EC-EP-NN-NN-FW is a Bosch Rexroth drive converter in the HCS series. It is a Design 1 model cooled by forced air ventilation and has an IP 20 degree of protection according to EN 60529. This indicates that solid external materials of 12mm diameter or more cannot penetrate the converter to cause damage. Its control section design is ECONOMY, and it uses Sercos/EtherCAT for communication with other control units. The supported pulse width frequencies for its operation are 4kHz, 8kHz, and 12kHz. It also works with a three-phase AC supply voltage between 200V and 500V. Thanks to its multi-encoder interface, encoders with a supply voltage of 5V and 12V can be connected. These include the MSM and MS2N motor encoders and the sin-cos encoder (1Vp) with reference track.
As a product of category C3 per IEC 61800‑3, the HCS01.1E-W0054-A-03-E-S3-EC-EP-NN-NN-FW is best-suited for industrial areas. It is equipped with a smart standard control panel with a single-line display and four keys. These keys are used to commission the converter, explore its functions, and initiate fault resolution. The panel supports the programming module function and allows device swap without a PC. This HCS model should be installed at a maximum height of 1000m above sea level and operated at a maximum ambient temperature of 40oC.
Wake Industrial Warranty
