HCS01.1E-W0054-A-03-B-ET-EC-NN-S4-NN-AW

Product Description

The HCS01.1E-W0054-A-03-B-ET-EC-NN-S4-NN-AW is a current converter designed By Rexroth Indramat to control the operation of industrial motors by converting direct current (DC) to alternating current(AC) and supplying the motor with an input current that will generate an output proportional to pre-determined configurational parameters. This industrial controller operates with scalable signal processing and firmware, it features compact construction and is perfectly safe for operation under ideal industrial conditions. Apart from the accurate control carried out by this device, it is also designed with a winding short circuit at the motor output, this circuit is designed for immediate shutdown in reaction to any fatal operational error. The HCS01.1E-W0054-A-03-B-ET-EC-NN-S4-NN-AW industrial controller also contains a performance-dependent internal fan which regulates the operational temperature of the industrial motor through the process of forced ventilation.

The HCS01.1E-W0054-A-03-B-ET-EC-NN-S4-NN-AW industrial motor features a multi-encoder interface which allows it to exchange digital information with different types of encoder systems, it also contains an all-sensor adaptor box that allows it to operate MCL  linear motor with digital hall sensors. This industrial controller also features an integrated safety technology which includes L3 safe torque off, the L4 safe brake control, S5 safe motion, and the SB safe motion box. The presence of freely configurable digital input and output units also makes it possible for the controller to communicate easily with additional components needed for an efficient operation.

The HCS01.1E-W0054-A-03-B-ET-EC-NN-S4-NN-AW industrial controller features a three-phase electrical mains connector through which it receives electrical energy from the mains, the input voltage used by this controller is about 500 volts, while the maximum input current is as high as 54 amperes. To maintain an optimum operation, this industrial controller should not be installed at a maximum height that exceeds 1000 meters above sea level.