Product Description
Bosch Rexroth provides a complete variety of industrial automation products that are extensively used in the industry, such as AC servo motors, frequency converters, main spindle motors, and drive controllers.
The HCS01.1E-W0054-A-03-B-ET-EC-EM-L4-NN-FW model has an encoder emulation as interface 2 and a current output rating of 21 A. With a maximum input current of 54 A, the model operates at its highest level of efficiency. G1 is the allowed mounting location for the HCS01.1 drive controller, and it contains the power supply unit. The feed current frequency should range between 50 and 60 hertz. There should be sufficient room at the top and bottom of a group for air circulation. The model must be maintained away from electromagnetic radiation-emitting equipment. Prior to activation, the model must be adjusted to satisfy the application-specific requirements of the motor. Interface 1 of the model is a Multi encoder interface that can only be used in accordance with the installation and operation specifications given in the user guide. The HCS01.1 drive controller is equipped with a multi-ethernet connection module and is only compatible with the peripherals and components stated in the specification. Interface 3 of the model consists of STO (safe torque off) and SBC (safe brake control).
The model HCS01.1E-W0054-A-03-B-ET-EC-EM-L4-NN-FW requires a specific three-phase AC 110-230 V power supply module (10 percent tolerance). The model weighs 4.60 kilograms and has an insulation resistance of 10 Mohms at 500 V DC. The IP20-approved drive controller should not be exposed to excessive heat. It is intended that the controller (HCS01.1E-W0054-A-03-B-ET-EC-EM-L4-NN-FW) be cooled by ambient air. A fan or blower circulates air to eliminate excess heat from the control unit.
Wake Industrial Warranty
