Product Description

The Bosch Rexroth HCS01.1E-W0028-A-03-B-ET-NN-NN-NN-FW is a robust and versatile drive controller that is designed to control electric motors as well as monitor their operation. Operation of the device is permitted only in the specified combinations and configurations of the components using the specified software and firmware. If the name of a component is not listed in the product documentation, it should not be connected or mounted. The same is the case with lines and cables. The product should be installed in a control cabinet in the G1 position. Filters must be installed in the cabinet’s air intake opening to prevent the entry of unclean air into the cabinet. There are braking resistors at the back of the HCS 01 drive controller. These resistors can turn very hot when the device is live. When the device is mounted in the control cabinet, care should be taken to ensure that there isn’t any heat-sensitive material near the braking resistors. The tightening torque of the mounting screws of the unit is 6 Nm. The device should not be used in residential areas with low voltage power supply. If it is used, there is a possibility of high-frequency interference and proper additional measures must be taken to suppress the interference. There should not be any objects in the machine’s range of motion. Personnel can prevent the instance of accidentally entering the device’s range of motion by using safety measures and equipment, including safety guards, protective coverings, safety fences, and light barriers. The user should make sure that the safety fences as well as the protective coverings are sturdy enough to resist the kinetic energy generated. The absolute humidity that should be maintained during storage of the product is 1 to 29 g/m3.