Product Description
Bosch Rexroth's high-quality drive controllers, servo drives, brake resistors, servo amplifiers, universal cards, synchronous motors, electronic amplifier cards, and frequency converters represent the company's commitment to customer satisfaction. These devices are often utilized in several automated industries.
The HCS01.1E-W0028-A-03-B-ET-EC-PB-NN-AA-FW model includes a basic control section and small dimensions (70 mm x 196 mm x 268 mm) (W x D x H) to permit rapid assembly and accurate placement. The manufacturer intends for this HCS01.1 drive controller to operate between 0 and +40 degrees Celsius. The model is intended to be cooled by an integrated blower/fan and must be installed in the G1 position. It is necessary to remove dust and other impurities from the entering air. The model has a maximum current rating of 28 A and contains a multi-ethernet connectivity module. The communication module is necessary for transmitting parameters to the drive controller. Typically, the master and driver will exchange parameters. This drive controller has an output current rating of 11.5 A and must be transported between -25 and +75 degrees Celsius. The HCS01.1 drive controller weights 2.10 kg and has a PROFIBUS interface 2.
The model HCS01.1E-W0028-A-03-B-ET-EC-PB-NN-AA-FW has a multi-encoder as interface 1 and an empty interface 3. This device's input current rating is 10 A, and its IP 20 rating offers protection against particles. However, it must be placed in a control cabinet with environmental protection. To ensure that there is sufficient airflow, a space of 90 millimeters of air should be included between the model's base and its top. The model (HCS01.1E-W0028-A-03-B-ET-EC-PB-NN-AA-FW) has an insulating resistance of 10 Mohm and requires a mains connection voltage between 200 and 500 volts, with a 10% tolerance.
Wake Industrial Warranty
