HCS01.1E-W0028-A-03-B-ET-EC-NN-L4-NN-AW

Product Description

The HCS01.1E-W0028-A-03-B-ET-EC-NN-L4-NN-AW drive controller offered by Bosch Rexroth features a multi-encoder interface for any standard encoder. This controller implements Safe Torque OFF and Safe Brake Control functionalities. The product supports only three-phase operation. This device incorporates Ethernet-based communication with a SERCOS III protocol. The unit comprises a basic design control section. It cannot be operated at a temperature higher than 55°C. This product takes up to 15 minutes to cool down completely after its power connection has been turned OFF. The device operation must never be done underwater. This unit has one analog input and eight digital inputs.

The controller makes use of a SHL03.1 Hall sensor adapter box for operating an MCL series linear motor. It portrays a standard design. The product connection must be established using only the manufacturer’s readymade connection cables. This device comprises several connectors that cannot be plugged in or removed when it has been powered. The unit is intended to be secured against direct contact by using closed housing. It features over 3.5mA leakage current. This product is free of harmful materials that have an adverse effect on the environment. This controller has backup support for one year.

The device requires additional interference suppression measures to be undertaken when use in residential areas with a mains supply with a low voltage. This unit features 196mm depth. It incorporates Class 1 field wiring made of copper. The controller supports three PWM frequencies of 4kHz, 8kHz and 16kHz. This product must not be operated outside the control cabinet. The device has 0.15mm peak-peak vibration sine amplitude at 10Hz to 57Hz frequency. This unit mounting is allowed only in the G1 orientation to prevent damage to its components. It is cooled by natural convection. This controller is delivered to your address in any country.